unical bike

i want to make my special and bike one of the kind.
like change back light or other things.
Did you make your Cat special?
Tell me what you did.

I guess you mean unique.

Most of my unique features were added due to 'accidents'.

New front fender (carbon), alternator and clutch covers, R&G crash bungs, R&G bar ends, wheel rim tape & BIG American indicators.
I've also added aluminium (i think) mesh to the gaps in the fairings.

If you make your bike exactly as unique as mine - it won't be unique :(

Screens, transfers, stickers, vinyl wrap, seats, seat cowls, indicators, braided hoses are some of the other changes folks on here has made although I'm sure I've missed some.

Cheers
Rosco

Rosco wrote:I guess you mean unique.

Most of my unique features were added due to 'accidents'.

New front fender (carbon), alternator and clutch covers, R&G crash bungs, R&G bar ends, wheel rim tape & BIG American indicators.


Cheers
Rosco

You so don't deserve those indicators I gave you ungrateful sod!

Rosco wrote:
I've also added aluminium (i think) mesh to the gaps in the fairings.

I like the sound of that, might pinch that idea

Ezzy's Mum! wrote:You so don't deserve those indicators I gave you ungrateful sod!

No,no I was very grateful. But they do make it unique. I like em big....Cheeky Cow

Cheers
Rosco

Fnar fnar

i was asking more about . can i change back light so its look like different bike

stevedj2000 wrote:

Rosco wrote:
I've also added aluminium (i think) mesh to the gaps in the fairings.

I like the sound of that, might pinch that idea

i had that idea when i first got my bike , but havent found a shop with suitable looking mesh , where'd u get it from ? and steve if you do it , dont forget to change the mesh under your headlight (air intake) so i all looks nice

I can get hold of virtually limitless designs of mesh and expanded metals in aluminium through work so gonna have a look when
I'm Black in the office and let my imagination run riot

stevedj2000 wrote:I can get hold of virtually limitless designs of mesh and expanded metals in aluminium through work so gonna have a look when
I'm Black in the office and let my imagination run riot

any chance of getting a bit extra ?? small mesh shinny sivler but heat proof as i wanna fill in the V behind my wheel , to stop smallish stones hitting my down pipes

here some ere in s/steel.
[You must be registered and logged in to see this link.]

Tomcom i put a cbr 600 rr rear light on mine and i think it looks good plus its LED instead of a single bulb !!

Sounds interesting, any pictures??

hutch2064 wrote:Tomcom i put a cbr 600 rr rear light on mine and i think it looks good plus its LED instead of a single bulb !!

that what i was looking for. please send some pictures

there is a picture of my bike on the forms pictures (not a great one) but oldcat put a link to the american site where i seen it and it shows you how to do it step by step

do you know where is that link?

try looking at the navigation bar

i dont know where to look for and its not hard to help if you know

For a computer engineer you're not very savvy are you ?

The navigation bar is all the black buttons at the top of each forum page. They look like this ===> [You must be registered and logged in to see this image.], on each button is a word. Click on it and you will 'navigate' to where the button says it'll go. Good in it. One of them has YZF USA on it . . .

And No I don't know where his pictures are. You'll have to look for yourself.

ok i am lazzy

[You must be registered and logged in to see this link.]

Have a look here, the link to the other site is here also

Thx Steve you are the best

i have a better pic but not having any luck trying to upload it !!

its so eassy

for you maybe !!!!!