TomCom fairing project on the way

First topic message reminder :

I spend long time to design own fairing for my thundercat and long time to pick one i want.
after long time (aroung 5 month) i decide i want this one

[You must be registered and logged in to see this image.]
so i order them yesterday. i will post more pictures when i will get them. its around 10 days to make them and another 10 days to send them
and i need new bolds , screws :)i dont know what to do with them
SO IT IS THIS
[You must be registered and logged in to see this image.]

I haven't done it mate, you'd need to ask Thundersto600 or someone who has.

I used the holes at the back of the small section to clamp them all together. It isn't massively obvious but not as good as OEM.

Regards

Mike

You need to put 2 fixings through the holes at the back. That'll help pull it together.

Regards

Mike

Like a couple of pan head self drilling screws?

Can't remember exactly how I did it. Think there's 2 tabs which need holes drilling into. Then normal fixings from the packs from eBay (drawn a blank and can't remember their official name!!)

Regards

Mike

mikeyzf600 wrote:You need to put 2 fixings through the holes at the back. That'll help pull it together.

Regards
Mike

are you have it on your bike now?
any chance for pic?

I'm in my Jammies I'm afraid. But if you look at your picture, the second one, next to where is says Yamaha between the gaps, you can just about see a black tab. You need to drill holes in these to line up with the holes on either tail piece. Then bolt them together. Squeeze everything together while you mark it/drill it.

Regards

Mike

I didn't drill anything. I used the clips you can screw into...they're used all over the fainring especially on the v section at the front (sorry, don't know what they're called). Hold together the rear faring tight and screw up. Once the screw is tight the rear section shoudn't move. Hope this helps too. Ooh and Happy New Year

ok i take all fairings off no problem ok maybe some ot the screws need to be cut off

:( i cant finish it cause the weather :(
rain all the time so the bike is under the cover but no plasticks

[You must be registered and logged in to see this image.]
need 2 black parts on and mirrors and its done
its not perfect... but looks nice

Looking good Tom.

Really nice colours Tom, looks good.

nice colours there, glad its all worked out well in the end

not really work loots of gaps i think about sending them back

Looking good.

Loving the colour scheme. Really good job on the design that Tom, looks fantastic!    

really shit fairings :(
some of the pictures
[You must be registered and logged in to see this image.]

On close inspection I think you're right.
I ain't great, is it?   

Nothing a file & a bit of patience couldn't put right for the money?
I like it   

yeah this is true, I didnt like my fairing fit after 5 days so got nick to tinker it for me    

I think about sending them back. :( shame couse it is what I want. :(
Is it anything I can do to make it fit better?

Tom mine didn't fit perfect at first, like Nick as said a bit of fiddling with a file and they will look ok.. I think mine look good for the money mate

Another one of these makeup-less selfie's......scary

Nice bike though